Drilling rigs for Kubota

Do you work on Kubota mini-excavators and want to drill without unnecessary combinations? At Techna Poland, you'll choose a drill rig that not only fits the machine, but realistically copes with the terrain - whether you're operating in sand, clay or difficult, compacted ground. You choose equipment that is ready to go straight away, with a full attachment kit, auger and technical support. No modifications, no wasted time and no overpaying. Find out which models will be best just for your Kubota.

Back to top

Drilling rigs for Kubota at Techna Poland - equipment to suit your machine and terrain

If you work on Kubota machines, you know very well that not everything that is "universal" works. The attachments for this brand need to be well balanced, lightweight but robust and, above all, matched to the machine's hydraulic system. In the case of drill rigs, it's not just a question of fitting, but above all: flow, torque and adjustability for a specific type of soil.

At Techna Poland, you will find models that not only match the technical parameters of Kubota mini excavators, but are field-tested - from urban earthworks to drilling in clay, sand and mixed soil. You choose from the TEHB series, with torque from 2,000 to 8,000 Nm, drilling diameters from 100 to 600 mm and the possibility of using different auger types.

Each drill rig comes in a kit ready for installation, with adapter, auger and documentation. All you need to do is plug it in and you can start working. No need to combine or pay extra for additional parts.

Kubota construction equipment drill rigs - when efficiency counts, not just power

It is not enough that the drill rig works. It has to work equally well at every stage of the job. From driving the first auger bit into the ground, to precise guidance, to extracting the excavated material. With Kubota machines, it is crucial that the attachments are not too heavy, do not overload the pump and at the same time give enough torque to break through the more difficult soil layers.

The models in the TEHB series - especially the TEHB3000, TEHB3500 and TEHB6000 - are designs that have already proven themselves in hundreds of implement projects using Kubota machines. They offer flexibility: you can use different augers, change drilling speeds, and drill to a wide variety of depths without worrying about leaks or a drop in performance.

At Techna Poland, each configuration is individually selected to suit the type of machine and the specific field job. You don't need to know the hydraulic codes or dig through service manuals. You simply say what you have and what you want to do - we do the rest for you.

Drilling rig for excavator Kubota - how not to sink money into the wrong attachment

One of the most common mistakes is to buy a drill rig 'to spare' or 'just in case'. Too much torque? The machine gets tired. Too little? You won't get through thick clay. An inadequate fit can lead to overloading of the hydraulic system, a drop in performance and, worse, premature wear and tear of the machine.

That's why, for Kubota excavators, it makes sense to focus on matching the attachment to the specific flow and operating pressure. For models in the 4-8 tonne range, the TEHB3500 and TEHB6000 are best suited. They offer a torque of 3500 and 6000 Nm respectively, giving you the ability to drill up to 600 mm in diameter, while maintaining safety for the pump and hydraulic valves.

At Techna Poland, you are also assured that you are not overpaying for redundant options. Hydraulic drill rigs are selected to realistically match the needs of the site, depth of the well and frequency of use.

Kubota forging drill rig - not just for light tasks

Not every field job ends in sand or light clay. Sometimes you need to break through hard ground, old concrete, roots or rock. This is where drill rig models that are designed for tasks bordering on drilling and forging come into play. A Kubota machine can do the job, provided you choose the right torque and auger type.

The TEHB6000 and TEHB8000 are models that , in combination with suitable spiral or gear augers, can handle even the most demanding conditions. The appropriate tooth geometry allows for efficient breaking of compacted soil layers, and the robust gear design reduces the risk of failure at high working torques.

This type of configuration works well, for example, for point foundations, installation boreholes and work on degraded areas. Importantly, you do not need separate tools for each task. Simply change the auger - the drill body remains the same.

Kubota's high-performance hydraulic earth auger for mini excavator is for users who want a combination of compactness and high working power. Thanks to its robust construction and precise hydraulic system, the equipment is suitable for both construction and fencing work. Similar qualities are offered by the JCB excavator drill rig, the powerful CAT backhoe loader drill rig and the lightweight hydraulic earth auger for mini excavators with hydraulic earth auger, a popular choice for utility companies.

Kubota mini excavator drill rig - compact equipment that gets the job done

With mini excavators, it is not only the weight and size that is crucial, but above all the ability to operate efficiently in a small working area. The drill rig must have the right torque, but also respond well to varying pressure, have a flexible head and an auger that does not "jerk" the machine when reversing.

At Techna Poland, this is why the TEHB2000, TEHB3000 and TEHB3500 are recommended. These models have a design optimised for 1.5-4 tonne machines, operate at a flow rate of between 20 and 60 l/min, and are perfectly balanced in weight and torque for typical urban and garden tasks.

If you're looking for something you just plug in and start working - this is where you'll find ready-made configurations. No searching for adapters, no uncertainty about whether the hydraulics will hold it. Just a specific job at a specific pace.

Frequently asked questions by our customers

Question Answer
Do I need to know the exact Kubota model to select the right drill rig? No. You only need to know the weight of the machine and the basic hydraulic parameters (pressure, flow). On this basis, we will select the right drill rig and match the attachment. If you know the model designation - all the better, but it is not necessary. You don't have to be a mechanic to find the right fit with us.
What drilling diameters can I get on a Kubota mini-excavator? Yes - as long as you use the right hydraulic oil and service your equipment regularly. Our breakers have been tested in harsh weather conditions, including low temperatures and humid environments. The housings and components are protected against corrosion and the vibration dampening system works whatever the season.
Are drill rigs for Kubota available off-the-shelf or do you have to wait? All you need to do is specify the machine model, type of work and approximate weight - we'll take care of the rest. You don't need to know all the technical data to get the right equipment. Our consultants will help you quickly and specifically, and you will get a quote that really fits your needs.

Check out the articles about hydraulic earth augers in Techna's guide: