Drilling rigs for Bobcat

Whether you're working on a mini excavator, loader or compact backhoe loader - with us you'll find drills that actually fit the hydraulics of your Bobcat machine. You're not buying 'blind' - you're getting a kit that's ready to go, matched to torque, flow and real-world field conditions. Augers, adapters, quick couplers? All included in the kit. Find out which model will work best for your job.

Back to top

Drills for Bobcat - attachments that really fit

You know your machines best, so you know that Bobcat is a brand that demands precision. Whether you're working on a mini excavator, loader or backhoe loader - fitting attachments is crucial. Hydraulic drill rigs need to work with the hydraulic system, not overload it. That's why it's so important to choose only models that are actually tested on Bobcat machines and work stably with them.

In Techna Poland's range you will find compact and powerful units from the TEHB series that work well with the brand's machines. Here we have equipment with a torque of 2,000 to 8,000 Nm, drilling diameters from 100 to 600 mm, with different auger bit variants. All this so that you don't have to fiddle with installation or adaptations. Just plug and go.

Importantly, the kits are immediately configurable to your machine - including adaptors, spiral augers, guide pilots and additional quick couplers. No searching for solutions on a forum or calling three different services. You have everything in one place.

Bobcat construction machine drills - when you have less time than work

You can't always afford to test and experiment. Sometimes you just need to get on the job and make sure everything works. And that's where well-configured drill rigs for Bobcat machines come in. Not only do they fit hydraulically, but they are also optimised for weight, power and size.

An example? The brand's mini excavators and compact loaders work well with the TEHB2000, TEHB3000, TEHB3500 models, which have a compact design, high torque and low flow requirements. They are ideal for urban work, private developments and hard-to-reach areas.

All models are designed for heavy-duty use, with planetary gearboxes, industrial seals and overload protection designs. This means less downtime, less risk of failure and more drilled holes per day.

Bobcat mini excavator drilling rig - equipment for metres of work done

Bobcat mini excavators are the equipment you will most often encounter on plumbing works, fencing, point foundations or domestic developments. And although they are compact machines, they can really do a lot - but only if they have the right attachments.

At Techna Poland, you'll find hydraulic earth augers for mini excavators that don't overload the hydraulic system but still offer specific working torque. Models such as the TEHB3000 and TEHB3500 allow you to drill up to 400-500 mm in diameter, with a flow rate of just 25 l/min, which is ideally suited to Bobcat mini excavators.

The lightweight design means you can operate the drill with confidence without risking overloading the machine, while still having the power to break through compacted soil, clay or old building sand. This is not 'some there' fence drill. This is equipment that does a specific job.

Bobcat forging drill - when the ground can't be drilled straight

You're not always going to end up with level ground and favourable conditions. Sometimes you have to break through mixed ground, a layer of roots, old asphalt or the remains of previous projects. That's when attachments that not only drill, but can also cope with tougher resistance come in handy.

The top-of-the-range models, the TEHB6000 and TEHB8000, allow for more than standard drilling. They offer torques of up to 8000 Nm, giving you the ability to work in demanding terrain. Combined with specialised breaking or spiral augers, you can complete tasks that would normally require mechanical forging.

It's a time-saving solution that allows you to use one machine for several types of job. No changing, no switching to another machine, no delays.

Bobcat hydraulic earth auger - when you don't want to return to service

A good tool is one that you don't have to think about. You just start it up and get on with it. This is exactly what the hydraulic earth augers on offer at Techna Poland are. Each drill rig model for mini loaders and excavators is tested for tightness, axial balance and gearbox strength.

All components are industrial grade. Seals, bearings, mounting components - these are not budget solutions, but components designed to work 6 days a week, in variable conditions, in the ground, in sand, in the rain.

This avoids frequent servicing, oil changes or unplanned downtime. And if any technical problem arises - you have full support and quick access to parts.

Bobcat demolition drill - for jobs that start with a hard "no"

Some developments start with removing what is already in the ground. And this means that a simple drill rig may not be enough. You need a rig that not only compacts the excavated material, but handles it without a trace of weakness.

The higher-range TEHB series of demolition drills are an option for those who enter a construction site with the assumption that things are going to get tough and you need to break through. They have torques up to 8,000 Nm, the designs have extra reinforcements and the auger can be swapped for specific ground.

This is not equipment to impress. This is equipment that gets the job done where others give up.

The compact hydraulic earth auger for mini excavator Bobcat is ideal for jobs where precision and manoeuvrability are important. Its high performance in a compact size makes it suitable for construction and installation work. JCB construction machine drills, powerful CAT excavator drills and practical Kubota hydraulic earth augers with hydraulic earth auger for mini excavators also perform well in similar tasks, providing equally smooth and stable operation.

Frequently asked questions by our customers

Question Answer
Does any drill rig fit a Bobcat if it has the correct mount? No. Even if the mount fits physically, the key is to match the hydraulic parameters, i.e. pressure, flow and power of the machine. At Techna Poland, we select the drill rigs so that you don't overload the system, lose torque or have to rework anything.
What bore diameter can I get on a Bobcat mini excavator? The most commonly used augers have diameters between 150 and 400 mm, which is sufficient for most fencing, installation and foundation work. With the right torque you can easily go as high as 600 mm, but only if your machine allows it.
Are Bobcat drills available on lease or with hire purchase options? Yes, we offer simple forms of financing - both leasing and 0% instalments in selected cases. For companies, advance invoice, settlement in instalments and express delivery without waiting are also possible. Ask - we will prepare a specific quote for your machine.

Check out the articles on hydraulic earth augers in the Techna guide: